The Wavlink WiFi extension setup is simple. First, verify that the extender is plugged into an outlet that has access to the present WiFi signal. Stay off once the indicator lights level off. Using the given passwords, connect your device to the WiFi network of the extender. To finish setting up, use a web browser to access the Wavlink setup site and refer to the on-screen directions. It’s a simple, fast process that ensures you have strong, long-lasting internet access in your house or place of business.

Requirement for wavlink wifi setup?

A source of power and a device with a web browser are all you need for a basic Wavlink WiFi setup. Just put in the Wavlink extender, open an internet connection with your device, open a web browser, and adhere to the setup steps. Easy and easy!

Mannualy method for wavlink wifi extender setup?

• Put your Wavlink extender in a power outlet which is within the WiFi network’s service area.
• Locate and set up a link to the Wavlink extender’s WiFi network via your device
•  On your device, open a web browser.
•  Put the default IP url—typically 192.168.10.1—into the address bar of the browser you’re using.
• To get to the extender’s settings, use the credentials that have been provided.
•  Choose the current WiFi network, put in its password, next save the settings via the on-screen directions.

NOTE : If you need any help regarding your wavelink wifi range extender so get in touch with the technician or visit the official web site that is ap setup.

Wavlink wifi extender setup via wps button

• Set the Wavlink extender inside the range of the current WiFi network and connect it to a power source.
• Activate the Wavlink extension by turning it on and waiting until the indicator lights even up.
• Select and press the Wavlink extender’s WPS button.
• Push the WPS key on the current WiFi router within a minute.
•  Check for the lights on the Wavlink extension to go on a sign the connection proved successful.
•  After that, you’ll have wider WiFi coverage!

Login method for wavlink wifi setup

•  Confirm sure the device is linked to the Wavlink extender’s WiFi from an Ethernet cable or WiFi.
• In the device it’s related to, open a web browser.
•  Type Wavlink’s default IP address, typically 192.168.10.1, in the browser’s search box and press Enter.
• You’ll go to the login page upon selecting the button below. Enter the default password and username that are listed on the device labelling or in the Wavlink manual.
• : You may now access and modify the Wavlink extender options to personalise your WiFi network before login in.

Firmware update on wavlink wifi setup

•  Confirm if the device is connected to the Wavlink WiFi extender by an Ethernet cable or WiFi.
• On the device it’s connected to, open a web browser.
• Enter Wavlink’s default IP address, commonly 192.168.10.1, in the address bar of your web browser and hit Enter. Enter your password in order to log in.
•  Look for the software or software update area in the extender settings.
• To start the firmware update, follow the on-screen steps. This may involve getting your extender’s firmware upgraded by downloading it from the Wavlink website.

How do I reset my wavlink wifi extender setup?

• Search for the Wavlink WiFi extender’s reset button. Usually, the device includes a tiny button on it.
• hold down the reset key for ten to fifteen seconds using a paperclip or similar small device. When the symbol lights start to flash, release it.
• Switch down the Wavlink extender’s battery and provide it ten seconds or so of wait. Replace it to the electric outlet.
• After the extender has reopened, connect your device to the Wave Link extender’s default WiFi network.
• Reconfigure the settings by using a web browser, signing in with the preset credentials, and typing the default IP address, most often 192.168.10.1. To change the settings on your Wavlink WiFi extender, adhere with the on-screen suggestions.